Data Sheet
New Product
TSSP77038
www.vishay.com
Vishay Semiconductors
Rev. 1.0, 09-Mar-12
1
Document Number: 82470
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IR Receiver Modules for Remote Control Systems
MECHANICAL DATA
Pinning:
1, 4 = GND, 2 = V
S
, 3 = OUT
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for 38 kHz IR signals
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Capable of side or top view
• Insensitive to supply voltage ripple and noise
• Two lenses for high sensitivity and wide receiving angle
• Narrow optical filter to reduce interference from plasma
TV emissions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The TSSP77038 is a compact two lens SMD IR receiver
for sensor applications. It has a high gain for IR signals
at 38 kHz. The detection level does not change when
ambient light or strong IR signals are applied. It can receive
continuous 38 kHz signals or 38 kHz bursts.
This component has not been qualified according to
automotive specifications.
BLOCK DIAGRAM APPLICATION CIRCUIT
1
2
3
4
20953
1
2
3
4
209
5
3
PARTS TABLE
CARRIER FREQUENCY SENSOR APPLICATIONS
38 kHz TSSP77038
33 kΩ
Demo-
pass
AMPInput
PIN
Band
dulator
16833_17
3
1, 4
2
GND
V
S
OUT
C
1
IR receiver
GND
Circuit
µC
R
1
+ V
S
GND
Transmitter
with
TSALxxxx
V
S
V
O
17170-10
OUT
The external components R
1
and C
1
are optional
to improve the robustness against electrical overstress
(typical values are R
1
= 100 Ω, C
1
= 0.1 µF).