Data Sheet

ManualsBrandsPololu ManualsStepper Motor ControllersT834 USB Multi-Interface 2.5-10.8V, 1.5A Stepper Motor Controller (Soldered)

Never sleep

Offset 0x02

Type unsigned 8-bit

Data

• 0: false

• 1: true

Default false

Settings file never_sleep

Settings file data true or false

Tic Control Center Advanced settings tab, Miscellaneous box, Never sleep

By default, if the Tic is powered from a USB bus that is in suspend mode (e.g. the computer is

sleeping) and VIN power is not present, it will go to sleep to reduce its current consumption and comply

with the USB specification. If you enable the “Never sleep” option, the Tic will never go to sleep.

Disable safe start

Offset 0x03

Type unsigned 8-bit

Data

• 0: false

• 1: true

Default false

Settings file disable_safe_start

Settings file data true or false

Tic Control Center Advanced settings tab, Miscellaneous box, Disable safe start

This option disables the safe start feature, which is described in Section 5.4.

Tic Stepper Motor Controller User’s Guide © 2001–2018 Pololu Corporation

6. Setting reference Page 85 of 150