User Manual

6
QUICK START GUIDE
Transmitter
1. Insert Battery�
2. Switch the Channel Selector Switch to the
desired channel (A or B)�
3. Plug microphone into Mic input jack.
4. Attach belt clip and clip
transmitter to your belt�
5. Attach microphone to
clothing using tie clip�
6. Slide the power
switch to the ON
position�
Receiver
1. Insert Battery�
2. Switch the Channel Selector Switch to the same channel as
the one selected on the transmitter (A or B)�
3. Screw the antenna onto the receiver�
4. Slide the power ON/OFF switch to
the ON position�
5. Attach the mounting bracket to
receiver and mount on camera
shoe with antenna facing the
direction you are shooting�
6. Plug the earphone into phone out
jack.
7. Connect the 3�5mm audio cable
from the Mic Out jack on the
receiver to the Mic In jack on the
camera or audio device into which
you are recording�