User Manual

RECORDING TO HDSLR, VIDEO CAMERA, OR AUDIO DEVICE

Transmitter:

1. Switch the Channel Selector Switch to the desired channel (A or B)�

2. The belt clip on the back of the unit clips the transmitter onto a belt� Alternatively, the transmitter can be put into a pocket�

3. Plug the Lavalier microphone into the Mic Input jack.

4. The microphone can be attached to a necktie, lapel or garment using the included tie clip�

5. Slide the Power switch to the ON position� The LED indicator will light up�

Receiver:

1. Switch the Channel Selector Switch to the same channel as the one selected on the transmitter (A or B)�

2. Run the 3.5mm mini-plug audio cable from the Mic Out jack on the receiver to the external mic (Mic In) jack on the DSLR, video

camera, or audio device�

3. Screw the antenna to the receiver�

4. Plug the monitor earphone into the Phone Out jack in order to listen to the signal.

5. Turn the Power switch to the ON position� The LED indicator will light up�