User Manual

10
QUICK START
1. Set up your PA-5150 as described above.
2. Use the power cord to connect the PA-5150 to an AC wall outlet.
3. Turn the Main Level knob, Echo knob, and the channel input level knobs down to the
minimum position.
4. Set the EQ and Level knobs to the middle position.
5. Connect your device to the appropriate input and setting (see
Front Panel on page 4).
6. Use the Power Switch to turn on the PA-5150. The power LED will light up.
7. Turn the Main Level knob up to the middle position, and play the audio source (play a guitar or
keyboard, sing into the microphone, or start your CD or MP3 player).
8. Adjust channel input level knobs until the proper volume level is attained. If there is distortion, make
sure you have selected the appropriate mic/line setting, or turn down the channel input level knob.