User Manual

14
Problem Solution
The AC power cable is plugged in, but
there’s no power.
• Make sure both ends of the AC power cable are completely plugged into their
respective sockets.
• Make sure the wall outlet is live.
• Make sure the power switch is in the On position (up), and that the power
indicator is illuminated.
There’s no sound or the volume is too
low.
Turn down the main volume on the PA-5150 before troubleshooting this problem.
• Check to see if the Main Level is turned up high enough.
• Check the input gain levels to make sure they are turned up.
• Make sure the volume control of your input device is turned up.
• Make sure all cables are completely connected at both ends.
• Check to see if a mute is engaged on the mixer.
• If your microphone has an on/off switch, make sure it’s turned on.
TROUBLESHOOTING