User Manual

8
SETTING UP THE PA-5150
One-Speaker Setup
The PA-5150 can be set up as a personal speaker and monitor.
1. Attach the mic stand mounting adapter to a mic stand by screwing the adapter onto the stand’s 5/8-inch
threaded post.
Note: If the mic stand’s arm has a 1/4-inch post, remove the
5/8-inch bushing from the mounting adapter.
2. Screw the mic boom adapter into the 1/4-inch socket on the
top of the PA-5150, and tighten the locking collar by turning it
clockwise until secure.
3. Align the adapter socket on the bottom of the PA-5150 with
the mic stand mounting adapter, and place it onto the adapter.
4. Attach a mic boom arm onto the mic boom adapter.
PA-5150