User Manual

SETTING UP THE PA-5150BT

One-Speaker Setup

The PA-5150BT can be set up as a personal speaker and monitor.

1. Attach the mic stand mounting adapter to a mic stand by screwing the adapter onto the stand’s 5/8-inch

threaded post.

Note: If the mic stand’s arm has a 1/4-inch post, remove the

5/8-inch bushing from the mounting adapter.

2. Screw the mic boom adapter into the 1/4-inch socket on the top of

the PA-5150BT, and tighten the locking collar by turning it clockwise

until secure.

3. Align the adapter socket on the bottom of the PA-5150BT with the

mic stand mounting adapter, and place it onto the adapter.

4. Attach a mic boom arm onto the mic boom adapter.

PA-5150