User Manual

5
POWERING THE PMA-1
Plug the 12 V power cord into the power input, and plug the power adapter into an outlet. The LED will light up.
CONNECTING THE PMA-1
Mic Input
Connect the microphone to the Mic Input with a balanced XLR cable.
Mic Thru
Run a balanced XLR cable from the Mic Thru port to the mic input of a
mixing console or sound board.
Note: For condenser microphones, the PMA-1 does not supply its own
phantom power, but it will pass along phantom power from a mixing
board.
Monitor Input
Use a balanced or unbalanced 1/4 in. cable to connect the Monitor Input
with the aux out of a mixing board, computer sound card, or line output
of a playback device.