User Manual

11
MOUNTING THE RECEIVER
Use the mounting hardware (sold separately) to install the receiver into a standard 19-inch equipment rack.
1. With the included screws, mount the angled rack attachments to the sides of the receiver.
2. Attach the rack ears to the angled attachments.
3. Attach the antenna extension cables to both antenna input jacks.
4. Place the antenna plug adapters into the rack holes so the nut is on the outside of the rack, and attach the
extension cables.
5. Attach the antennas to the plug adapter from the outside of the rack, and tighten the adjustment nut until it
is snug against the rack and holds the antenna securely in place.
6. Use standard rack screws and washers (not included) to mount the receiver and antenna assembly into your
equipment rack.