User Manual
13
3. Press the up or down buttons [ ] to select a channel.
4. Press set to conrm.
5. Look at the RF input indicator [
] on the LCD screen. If it lights up or ickers, it indicates there’s interference
on that channel. Select a different channel and repeat these steps until you nd an interference-free channel.
Note: If you connect the receiver to a sound system, mute the sound system. Anytime you change channels,
remove your headphones, and mute connected sound systems to avoid audible RF noise bursts.
TRANSMITTER
1. Connect the lavalier microphone to the transmitter’s microphone input, or plug a line-level source such as an
audio mixer or mobile device to the transmitter’s line-level input.
2. Turn on the transmitter by rotating the level control clockwise. You should hear a click and see the channel
indicator LED [
]light up.
3. Use the channel selector buttons [
]to set the transmitter to the same channel as the receiver
(see
Selecting Channels
on page 14).