User Manual

16
4. Adjust the audio output level on the receiver or the input level on your input device as necessary. Make sure a
sufcient level is being recorded. The objective is to transmit the highest possible level without distortion for
the best signal-to-noise ratio throughout the signal path.
Important! It is not recommended to adjust the gain setting of the handheld transmitter. The gain is preset to
the ideal setting. Any volume adjustments should be made on the receiver or on the input device.
5. When holding the ULW-16-HHT handheld transmitter, hold it in the middle of the transmitter body, not at the
end where the antenna is located. Covering the antenna with your hand will degrade the
transmission quality.