User Manual

17
MOUNTING THE TRANSMITTER
Once you have determined that the transmission quality and level are good, mount the beltpack transmitter to
your talent.
1. Use the integrated belt clip to secure the transmitter to your talent. Use the included tie clip to place the
microphone on your talent.
2. If you are connecting to a line-level source, use an appropriate cable to connect to the mono 3.5 mm jack.
Note: The line-level input overrides the microphone input.
The transmitter’s TX LED will glow orange when the unit is transmitting, and the receiver’s RF indicator LED
[ ]will glow blue when the unit is receiving a strong radio frequency signal.