User Manual

27
Problem Possible Cause Solution Comment
There is no
audio or
the audio is
intermittent.
(Continued)
The audio levels
are too low.
Turn up the microphone level on the transmitter. The
target level mark on the transmitter is a good start.
Adjust the headphone level on the receiver and listen
to make sure the signal is transmitting.
Turn up the input levels on your recording device
or mixer.
The transmitter
and receiver are
set to different
channels.
Make sure the transmitter, handheld transmitter,
receiver, and all other devices in your audio chain are
turned on and congured to the proper settings.
Too much
ambiance is
being picked
up.
The microphone
may be picking
up too much
ambiance.
Make sure the microphone is as close as possible to
the subject.
Approximately inches (15.2 cm) from
the subject is usually good microphone
placement, but you may need to
experiment.