Use and Care Manual

VAPORETTO GO
8
ENGLISH
CORRECT USE OF THE PRODUCT
This appliance is intended for home use as a
steam generator as described and in accor-
dance with the instructions provided in this man-
ual. Please read these instructions carefully and
keep them, as you may find them useful in the
future.
POLTI DECLINES LIABILITY FOR ANY DAM-
AGE OR ACCIDENT DERIVED FROM ANY
USE OF VAPORETTO WHICH IS NOT IN CON-
FORMITY WITH THE INSTRUCTIONS CON-
TAINED IN THIS BOOKLET.
PREPARATION FOR USE
Steam may cause serious injury if in
contact with body parts. Always allow the
steamer to cool down before handling.
To reduce the risk of personal injury
unplug the power cord from the electrical
outlet and let the appliance and the
accessories cool down completely before
handling.
Always make sure that the appliance is
unplugged before performing
maintenance work of any kind, including
adding water or cleaning the appliance.
• Unscrew the safety cap
(A).
• Fill the boiler tank with
25 fl oz (0.75 L) of water,
using the jug (13) and
the funnel (12) provided
for this purpose.
NOTICE: Ordinary tap water may be used.
However, since water contains limestone by
nature, which may cause scaling in the long run,
we recommend using a mixture of 50% tap
water and 50% distilled water or bottled spring
water. Never use 100% distilled water or bottled
spring water but always mix them with 50% tap
water.
•Screw the cap firmly
back into place with
care.
Make sure that the safety cap (A) is correctly
screwed on, otherwise steam could leak out.
•Open the door (I) of the
monobloc socket (H);
insert the monobloc plug
(1E) until you hear it
click. Check that it is
tight before proceeding.
•To unhook the sheath,
simply press the
unhooking buttons (1F)
while simultaneously
extracting the monobloc
plug (1E).
•Connect the power
cord (N) into an
electrical outlet of the
correct voltage.
VAPORETTO GO - NA - 1U03:FEV 1000-950.qxd 26/03/2014 17.20 Pagina 8