Operation Manual

VAPORETTO EDITION - VAPORETTO EVOLUTION
19
ENGLISH
CORRECT USE OF THE
PRODUCT
This appliance is intended for home use as a
steam cleaner as described and in accordance
with the instructions provided in this manual.
Please read these instructions carefully and
keep them, as you may find them useful in fu-
ture.
Polti declines liability for any damage or ac-
cident derived from any use of this appliance
which is not in conformity with the instruc-
tions contained in this booklet.
ATTENTION
Directive 2002/96/EC (Waste Electrical and
Electronic Equipment - WEEE): information for
users
This product complies with EU Directive
2002/96/EC.
The crossed-out wastebasket symbol
on the appliance means that at the end
of its useful lifespan, the product must
be disposed of separately from ordi-
nary household wastes.
The user is responsible for delivering the ap-
pliance to an appropriate collection facility at the
end of its useful lifespan.
Appropriate separate collection to permit recy-
cling, treatment and environmentally compatible
disposal helps prevent negative impact on the
environment and human health and promotes
recycling of the materials making up the pro-
duct. For more information on available collec-
tion facilities, contact your local waste collection
service or the shop where you bought this ap-
pliance.
IMPORTANT
Before leaving our factory all our products are ri-
gorously tested. For this reason, your VAPO-
RETTO may contain some residual water in the
boiler from the testing.
SET UP
Before using VAPORETTO for the first time as-
semble the pivoting wheels as indicated in the
Fig. A.
PREPARATION FOR USE
• Unscrew the patented safety cap (A) and fill
the boiler with about 1,3 litres of water using
the filler bottle / funnel (14) making sure that it
does not overflow (fig 1).
WARNING: When filling a hot boiler, we re-
commend adding small amounts of water
to avoid the water evaporating instantly
with the risk of burning.
This appliance has been designed to work
with normal tap water.
However, since water contains limescale by
nature, which may cause scaling in the long
run, we recommend using a mixture of 50%
tap water and 50% demineralised water or
treated with water softener systems. To use
tap water only and avoid scale formation, we
recommend the addition of the special natural
scale removal agent Kalstop FP2003.
Absolutely do not use distilled water, dryer
condensate water, perfumed water, rain
water, battery water, water from air condi-
tioning systems and the like. Do not use
chemical substances or detergents.
• Carefully screw on the safety cap to hand tight
(Fig. 2). Make sure the patented safety cap
(A) is fully and correctly screwed on,
otherwise you may experience steam esca-
ping from around the cap. In this case turn off
the appliance, unplug it from the mains and
wait for it to cool before screwing the cap back
on.
• Connect the power supply cable (F) into an
earthed power supply of the correct voltage.
This unit conforms with EC-directives 2004/108/CE (EMC) and 2006/95/CE
(low voltage)
.
Polti S.p.A. reserves the right to change equipment or accessory specification
without prior notice.
VT EDITION - VT EVOLUTION M0S10188 2T05:VT 2300 M0S05357 1L05 05/07/2013 16.48 Pagina 19