Operation Manual

NOTE: when filling, make sure that the water
does not overflow, to avoid wetting the surface
on which your Vaporella is resting
WARNING: Never leave the filling bottle or
the funnel resting on the mouth of the boiler,
with the product connected to the power
supply, since this could cause burns.
INSTRUCTIONS FOR USE
Press down the generator on/off switch (B)
and the accessories on/off switch (C) which
will light up.
Open the cover of the central connector block
(D) and insert the central connector (4) pres-
sing the connector button (5) and taking care
that the locking tab (6) is correctly positioned
in the lock-in aperture (E) on the block (Fig.
3).
When the generator on/off switch (B) goes
out, the steam cleaner is ready for use.
The steam gun (2) is equipped with a safety
switch (2A) which prevents the accidental
start of the steam jet by children or people
who do not know how to operate the ap-
pliance.
With the switch (2A) in the “OFF” position, the
lever controlling the steam jet is locked
(Fig.4b). To start working, set the (2A) switch
to the “ON” position and press the steam but-
ton (Fig.4a).
Should you have to leave the appliance unat-
tended, turn it off, unplug it and position the
button (4) in the OFF position.
The first burst of steam may contain some
water droplets, due to imperfect thermic sta-
bilisation inside the flexible hose. We would
therefore advise that the first jet of steam is
played onto an old cloth until a constant
pressure of steam is obtained.
Note: The generator on/off switch (B) may go on
and off from time to time during use of VAPO-
RETTO. This means the machine is maintaining
the correct and constant pressure and is quite
normal.
STEAM REGULATION FEATURE
VAPORETTOs are equipped with a steam regu-
lation control (I) (Fig. 5). You can increase the
steam flow by turning the control in clockwise di-
rection. Turning it in an anti- clockwise direction
reduces the steam flow. Here are some sugge-
stions for the choice of steam flow level:
Strong steam: for encrusted dirt, stains,
grease and for sanitising.
Normal steam: for carpets, rugs, glass, tiles
etc.
Delicate steam: for vaporising plants and
cleaning delicate surfaces.
CONNECTION OF ACCESSORIES
All the accessories of VAPORETTO can be con-
nected to the handle or to the extension tubes
as per the following instructions (fig. 6):
Move the locking button (11) on the accessory
to the “open” position.
Attach the required accessory to the hand gun
or to the extension tube.
Move the locking button (11) back to the posi-
tion ‘closed’.
Check that the locking button has engaged
and the accessory is fully connected.
PATENTED SAFETY CAP /
’’WATER OUT’’
The appliance is equipped with a safety cap,
which prevents opening of the generator tank as
long as there is any pressure remaining inside.
This is an important and indispensable safety
device, and it is necessary to follow the proce-
dure here below when re-filling the generator
tank.
When you have used up all the water in the tank,
proceed as follows:
Switch off the machine at the generator on/off
switch (B).
• Press the steam request lever (3) on the
steam gun (2) or, if using the iron, the steam
request button (R) on the iron (Q) so as to fully
exhaust the steam supply from the tank.
Switch OFF the accessory on/off switch (C).
Disconnect the power supply cable (F) from
the mains.
Unscrew anti-clockwise the patented safety
cap (A)
ENGLISH
20
VAPORETTO EDITION - VAPORETTO EVOLUTION
VT EDITION - VT EVOLUTION M0S10188 2T05:VT 2300 M0S05357 1L05 05/07/2013 16.48 Pagina 20