User Manual

Your Bluetooth USB adapter comes pre-paired to your headset.

1 Insert the Bluetooth USB adapter into your laptop or PC.

2 Pairing is successful when you hear “pairing successful” and the USB adapter LED is solid blue.

3 OPTIONAL: Headset call control Some softphones require the installation of Plantronics Hub for

Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute)

functionality.

NOTE Plantronics Hub software also allows you to customize your headset's behavior through

advanced settings and options.

Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music,

you will need to conﬁgure your Bluetooth USB adapter.

Windows

1 To conﬁgure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound

> Playback tab. Select Plantronics BT600, set it as the Default Device and click OK.

2 To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >

Communications tab and select the desired parameter.

Mac

1 To conﬁgure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On

both the Input and Output tabs, select Plantronics BT600.

1 To put your headset in pair mode, press and hold the power button towards the Bluetooth icon

until you hear "pairing" and the headset LEDs flash red and blue.

Activate Bluetooth on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*

• Android Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

Select “PLT Focus.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.

Connect and pair

Connect to PC

Configure USB adapter

Pair to mobile device