User Manual

To position the microphone on the right or left side, rotate the microphone boom up and over.
Adjust the boom so it points to the corner of your mouth.
TIP Your headset senses when you change the microphone boom from one side to the other and
syncs the audio and controls specific to each side.
IMPORTANT Before using, charge the headset fully to reset the accuracy of the talk time prompts.
Charge your headset with the charge stand or the micro USB cable. The headset LEDs flash when
charging. It takes up to 2 hours to fully charge your headset. The LEDs turn off once charging is
complete.
NOTE Both the charge stand and micro USB cable can be plugged into either a computer or wall
charger. It is only necessary to plug into a computer to update firmware.
Charge stand Micro USB cable
Headset LEDs Battery status
4–5 blue blinks Battery high
2–3 blue blinks Battery medium
1 red blink Battery low
flashing red Battery critical; Recharge headset
There are several ways to check your headset battery status.
1
Wearing the headset, tap the Call
button and listen to the voice alert (smartphone only).
2
When not wearing the headset, tap any button except the Call button and observe the headset
LEDs.
3
Place the headset in the charge cradle and observe the headset LEDs.
Fit and charge
Wear on the right or left
Charge your headset
Check headset battery
status
7