Voyager 100 Series User Guide
Contents Pair 3 Get Paired 3 Pair second device NFC pairing 3 Fit 3 4 Charge 5 The basics 6 Headset overview 6 Power on/off 6 Make/Take/End Calls 6 Mute 7 Adjust the volume 7 Play or pause audio 7 Track forward 7 Track backward 7 Support 8 2
Pair Get Paired The first time you power on your headphones, the pairing process begins. 1 2 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue. Activate Bluetooth® on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android Settings > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device. 3 Select “PLT V100 Series.” If necessary, enter four zeros (0000) for the passcode or accept the connection.
Fit For the best fit and sound quality, adjust the headband. 1 Lengthen or shorten the headband until the ear cushions fit comfortably over your ear. 2 Position the stabilizer T-pad above your ear. 3 Stretch and bend your headset for a perfect fit. 4 To wear the microphone on the other side, rotate the boom up and over. 5 Adjust the boom so it points to the corner of your mouth.
Charge It takes up to 2 hours to fully charge your headphones. The LED turns off once charging is complete. TIP To check the battery status, press the power button towards the Bluetooth button while wearing your headphones and not on a call.
The basics Headset overview voice Mute/unmute (during a call) Activate voice assistants such as Siri® and Google Now™ (while not on a call) Call button Redial Play/pause* Charge port Power button Bluetooth pair Volume up button Track forward* Volume down button Track backward* NOTE *Functionality varies by application. Power on/off Make/Take/End Calls Slide the switch to power on or off. Answer or end a call Tap the Call button.
Redial last outgoing call Double-tap the Call button. Activate voice assistant If your smartphone has a voice-enabled assistant, press and hold the Mute button for 2 seconds and wait for the phone prompt. Mute Adjust the volume Play or pause audio Track forward Track backward While on an active call, tap the red Mute button. Tap the Volume up (+) or down (–) button. Tap the Call button. Press and hold the Volume up (+) button for 2 seconds to skip to the next track.
Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Scorpius 171 Santa Cruz, CA 95060 2132 LR Hoofddorp United States Netherlands © 2018 Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. Patents pending. 212548-06 (03.