Plantronics Savi 8210- User Guide

• Headset volume Toggle the volume wheel repeatedly forwards or backwards to adjust
volume.
• Desk phone volume When you are on a desk phone call and your voice is too quiet/loud,
adjust the microphone volume on the side of the base, located behind the access panel. If
your caller's voice is too loud/quiet on a desk phone call, adjust the base volume dial.
• Base ringtone volume Adjust the base ringtone volume on the left side of the base. This
ringtone alerts you if you are not wearing your headset and a call comes in. There are 4
base ringer settings: off, low, medium and high.
To mute your headset during on a call, press the headset Mute button. When mute is
active, the base button is red. To unmute, press the headset Call button or the active base
Audio button.
• For Microsoft Teams, tap the headset's Call
button to interact (Teams desktop
application required).
• For Skype for Business, press and hold the headset's Call
button for 2 seconds to interact
(Skype for Business desktop application required).
• Set your target phone in Poly Lens Desktop App.
With the system idle, change your default phone line/audio channel by pressing and
holding the desired base Audio button for 4 seconds until it flashes green 4 times.
Customise in Poly Lens Desktop App.
To open an audio channel or get a dial tone, press the headset Call button for 1 second
while the system is idle; the default base Audio button turns green.
When you answer a call, the audio stays with that device (if you answer with the headset,
the audio stays on the headset; answer with your mobile phone, the audio stays on your
mobile).
1 To transfer a mobile call from your headset to your mobile phone, press the base mobile
phone button for 3 seconds. The green LED turns off.
2 To transfer a mobile call from your mobile phone to your headset, press the base mobile
phone once. The green LED turns on.
To stream audio from your computer or mobile device, first press the computer or mobile
base Audio button and then play the audio. When streaming audio, the base Bluetooth
button is purple.
Active Noise Cancelling (ANC) reduces external noise and enhances your music and sound
quality.
Your headset ships with ANC on. To turn ANC off, slide the switch away from "ANC".
You can limit the amount of nearby conversation that is transmitted during your calls.
Customise feature in Poly Lens Desktop App.
Simultaneously hold the base buttons of any two of the three base buttons until the LEDs
become solid green to combine the audio of any two devices and create a mini conference
call.
Adjust volume
Mute
Interact with Microsoft
softphone
Change your default
phone line
Get a dial tone
Transfer mobile audio
Audio streaming
ANC
Limit office noise
Mini conference call
13