Plantronics Savi 8210- User Guide

Optimise the comfort and t of your headset.
Adjust the headband
1 To adjust the headband, lengthen or shorten the band until it fits comfortably. Position the
ear cups so that the foam cushions sit comfortably over the centre of your ears.
2 Position the stabiliser T-bar above your ear, if applicable.
Adjust the Boom
For optimum audio, bend the boom so it is approximately two finger widths from the
corner of your mouth.
NOTE For true stereo listening when wearing the boom on the left, adjust the wearing
preference setting in Poly Lens Desktop App.
Place the headset in the charging cradle. The headset charging LED flashes green when
charging the headset and turns solid green when the headset is fully charged. Charge for at
least 20 minutes prior to the first use. A full charge takes 3 hours.
With a single full charge, the headset provides up to 13 hours of continual talk time in
wideband mode.
Determine your headset battery status:
• Listen to the voice prompts after powering on the headset
• Press the base subscription button; the base Audio buttons light up (solid green is high
battery, ashing green is medium, ashing yellow is low, ashing red is critical).
• View in Poly Lens Desktop App
Fit and charge
Customise your
headset
Charge your headset
Talk time
Headset battery status
9