Polycom Soundstation 2W- User Guide

SoundStation2W™ User Guide - 26
LCD Message Summary
The following messages are displayed on the console LCD to represent various
usage conditions.
LCD Message What it means: What you will see:
Ready
Phone is in idle state and ready to make
calls.
Idle screen.
No Signal
Signal strength is too weak to carry a
call.
Antenna icon will show
zero bars.
Call Ended
The call has been dropped. “Call Ended” with elapsed
time indicated.
Mobile Phone In
A mobile phone is plugged in to the
mobile phone jack OR a mobile
phone call has been initiated.
“Mobile Phone In”
Searching for
Signal
Attempting to contact the base
station to establish a connection
“Searching for Signal”
Enter Number
Enter the number you wish to dial.
Digits of the number you
are dialing.
Charging
A charger is plugged in and battery
is recharging.
“Charging”
Base Paging
Page button on base was pressed to
locate the console
Base paging. Press any
key to stop beeping.
Battery Low
The charge in the battery has
depleted. A recharge is required to
continue reliable operation of your
SoundStation2W™.
The remaining talk time
and an audible warning
tone.
Incoming Call
Phone received an incoming call. “Incoming Call”