Polycom Soundstation 2W- User Guide

SoundStation2W™ Administrator Guide - 31
Assign a passcode:
1. Press the Menu button, choose
Admin Setup using the Scrolling
buttons, and press the Select but-
ton. Choose Passcode using the
Scrolling buttons, and press the
Select button.
2. Press the ASSIGN soft key and enter
a three-digit password. If you
make an error, press the <DEL soft
key to erase the error.
3. Press the SAVE soft key. You may
press the CANCEL soft key or the
Exit button if you choose not to
save the passcode.
When you select Passcode from the Admin Setup menu,
the screen will display whether or not a passcode is cur-
rently assigned.
Passcode
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at http://esupport.polycom.
com.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,
choose Passcode using the Scroll-
ing buttons and press the Select
button.
the Base for 10 seconds.
5. Press CHANGE soft key if 1234 is
not the required GAP PIN, and enter
the new PIN by deleting the old one
first.
6. Press SAVE soft key.
7. Press REGISTER soft key.
For GAP registration, press GAP soft key in step 2.