Plantronics Voyager Legend CS - User Manual

1
Wearing the headset, press the Call button .
2
Remove the handset from the cradle, you will hear dial tone.
This step will be automatic if you install a handset lifer or EHS cable accessory. For a complete list of
accessories, visit www.plantronics.com/accessories
3
Dial the number using your desk phone.
4
To end the call, press the headset Call button
and hang up the handset.
1
If wearing the headset, press the Call button , or
2
If not wearing the headset, place the headset on your ear; the call will be answered
automatically.
3
Remove the handset from the cradle, your call is now active.
This step will be automatic if you install a handset lifer or EHS cable accessory. For a complete list of
accessories, visit www.plantronics.com/accessories
Use the Call Reject function on your desk phone, if supported.
Press the Call button
to end current call.
1
MUTE ON: During a call press the Mute button , you will hear the "mute on" voice prompt
which indicates the headset microphone is muted. The mute reminder is repeated every 15
minutes alternating between the voice prompt and a tone.
2
MUTE OFF: During a call while muted, press the Mute button
, you will hear "mute off", which
unmutes the headset microphone.
1
SECOND CALL ON DIFFERENT PHONE: Press the Call button
to end the first call, then press
the Call button again to answer the second call.
2
ON DESK PHONE, SECOND DESK PHONE CALL: Press the Call button to end the first call
then, if supported by your phone, press the Call button again to answer the second call.
Note: Your desk phone may also have second call management features which are better suited
for specific second call management needs.
Call Controls - Desk Phone
Place a call
Answer a Call
Reject a call (desk phone)
End a call
Mute a call
Answer a second
incoming call
17