Owner's manual

ManualsBrandsPoly-Tex ManualsGardening equipmentEnthusiast 6x4 Extension Kit

Overall Dimensions (Approx.)

Including base

49" L x 76" W x 82.7" H

ASSEMBLY INSTRUCTIONS

6'x4' Extension Kit

Please read these instructions carefully before you start to assemble this greenhouse.

To save time and will ensure proper assembly, follow the step-by-step instructions carefully in order.

New or revised instructions may be available for download at hobbygrower.com, or if you would like

to view a breif general assembly video to gain a basic understanding of how the structure is constructed,

visit http://www.hobbygrower.com, then click on the Assembly tab.

IMPORTANT!!!

Ent Ext vSEP_21_05

Manufactured by:

Summary of content (6 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 6'x4' Extension Kit Ent Ext vSEP_21_05 Manufactured by: Overall Dimensions (Approx.) Including base 49" L x 76" W x 82.7" H IMPORTANT!!! Please read these instructions carefully before you start to assemble this greenhouse. To save time and will ensure proper assembly, follow the step-by-step instructions carefully in order. New or revised instructions may be available for download at hobbygrower.
PAGE 2
SAFETY ADVICE We strongly recommend the use of work gloves during assembly as aluminium profiles may have sharp edges. Do not attempt to assemble the greenhouse in windy or wet conditions. Take special care not to touch overhead power cables with the aluminium profiles. Always wear shoes and safety goggles when working with extruded aluminium. Dispose of all plastic bags safely - keep them out of reach of small children. The greenhouse must be positioned and fixed on a flat level surface.
PAGE 3
CONTENTS ITEM P1 MM QTY. 23.6”x23.6 11 ITEM A11 MM QTY. 590mm 23.2” 8 1190mm 46.8” 2 1290mm 50.7” 4 600x600mm P3 23.6”x27.5 ITEM 47.2” 2 1200mm M602 4 A12 1190mm 46.8” 5 M604 600x700mm P6 2 6 1 M29 M21 M22 M10 MM QTY. 062” 16mm 5 6 M53 2 M10A -2- 0.
PAGE 4
1 Following the exising Assembly instructions supplied with your greenhouse use the extra sections supplied here to incorporate the extension into your greenhouse.
PAGE 5
3 M56 M56 4 At the 5 horizontal points on the roof, ensure you fit a strengthening metal part M10. Use the strengthening metal part M10A to join the bottom rail profiles.
PAGE 6
5 Use pairs of roof brackets M21 to clamp each roof section where shown (a). Fix brackets in place using nutsand bolts M69 (b). Tighten with 10mm wrench.