Quick Start Guide

BT600
ADAPTER
QUICK START GUIDE
Designed in Santa Cruz, California
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics BV
South Point Building C
Scorpius 140
2132 LR Hoofddorp
Netherlands
© 2015 Plantronics, Inc. Plantronics is a trademark of Plantronics,
Inc. registered in the US and other countries, and BT600 is a
trademark of Plantronics, Inc. Bluetooth is owned by Bluetooth SIG
Inc., any use by Plantronics, Inc. is under license. Mac is a trademark
of Apple Inc. All other trademarks are the property of their respective
owners.
203936-01 08.15
plantronics.com/support
plantronics.com/documentation
CONFIGURE
Windows
Your USB adapter comes ready to
take calls. If you want to listen to
music, you need to configure your
USB adapter.
1 To configure your USB adapter to play
music, go to Start menu > Control
Panel > Sound > Playback tab. Select
Plantronics BT600, set it as the
Default Device and click OK.
2 To pause music when you place
or receive calls, go to Start
menu > Control Panel > Sound >
Communications tab and select the
desired parameter.
Mac
To configure the USB adapter, go to
Apple menu > System Preferences >
Sound. On both the Input and Output
tabs, select Plantronics BT600.
PAIR
To pair your high-fidelity Bluetooth®
USB adapter to your headset, do the
following:
1 Insert the USB adapter into your
laptop or computer and wait for your
computer to recognize it.
2 Put your headset in pair mode (refer to
your headset’s user guide).
3 Put your USB adapter into pair mode
by pressing and holding the recessed
Pair button until the USB adapter
flashes red and blue.
Pairing is successful when you hear
pairing successful” and the USB
adapter LED is solid blue.

Summary of content (2 pages)