User Manual

The headset and base that came in the box are subscribed (connected) to each other. However, if
you wish to use a new headset or need to restore subscription to your current headset (base
subscription button is red), the units can be subscribed to each other by the following methods.
The subscription button is below the Bluetooth button on the front of the base.
Base subscription button LED
Base subscription LED Base status
Flashes green and red Primary headset subscription mode
Solid green Primary headset subscribed to base
Solid yellow Active conference call with guest headsets
Solid red No headset subscribed
Flashes green 3X, the yellow 2X Security level changed from enhanced to standard
Set the range
Changing the range can help with desk phone/PC audio quality, improve user density or restrict
range of users.
You can change the range using the subscription button on the base. With the system idle, press
the subscription and desk phone buttons for 3 seconds. With each 3 second press the desk phone
button will cycle through ranges: green for high range, yellow for medium and red for low.
Setting
Range
High (Default) (green) up to 350 ft.
Medium (yellow) up to 150 ft.
Low (red) up to 50 ft.
You can also adjust the range setting in Plantronics Hub Settings > Wireless. > Range.
Automatic secure subscription
With your system idle, docking a new headset automatically subscribes it to the base, making it
the primary headset. The base subscription LED blinks green/red during subscription mode and
remains green when the new subscription is established.
Manual secure subscription
With your system idle and your headset docked, double press the subscription button on the base.
The subscription light will flash red and green. When the subscription light on the base becomes
solid green, the headset and base are subscribed to one another.
Manual over-the-air subscription
1
With your system idle and your headset undocked, double press the subscription button on the
base. The subscription light will flash green and red.
2
Press the headset volume up button until the headset LED turns on. Upon release, you hear
"pairing." When the subscription light on the base remains solid green, the headset and base are
subscribed to one another; you hear "pairing successful. Base connected."
More Features
Base subscription button
18