Datasheet

Material Safety Data Sheet
No.: 2021010137 Date: 2021-01-01 Version: E01
Page
2
of
6
with soap and plenty of water.
Eye contact: Do not rub eyes. Immediately flush eyes with water continuously for at least 15 minutes. Seek medical attention.
A battery cell and spilled internal cell materials
Ingestion: If ingestion of contents of an open battery occurs, never give anything by mouth if victim is rapidly losing
consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE
VOMITING. Have victim drink 60 to 240 mL (2-8 oz.) of water. If vomiting occurs naturally, have victim lean forward to
reduce risk of aspiration. Have victim rinse mouth with water again. Quickly transport victim to an emergency care facility.
Section 5 - Fire Fighting Measures
Suitable extinguishing media: Plenty of water, carbon dioxide gas,nitrogen gas,chemical powder fire extinguishing medium
and fire foam.
Specific hazards: Corrosive gas may be emitted during fire.
Specific methods of fire-fighting: When the battery burns with other combustibles. Simultaneously, take fire extinguishing
method which corresponds to the combustibles.Extinguish a fire from the windward as much as possible.
Special protective equipment for firefighters: Respiratory protection: Respiratory equipment of a gas cylinder style or
protection-against-dust mask Hand protection:
Protective gloves Eye protection: Goggle or protective glasses designed to protect against liquid splashes Skin and body
protection: Protective clothes.
Section 6 - Accidental Release Measures
Emergency Procedures
Minor Spills of Cell Materials
Remove all ignition sources.
Clean up all spills immediately.
Avoid contact with skin and eyes.
Control personal contact by using protective equipment.
Use dry clean up procedures and avoid generating gas or volatile.
Ventilate the storage area.
Discharge the cell to Zero Voltage by a over 5 Ohm resistance, before place into waste container.
Place in a suitable labeled container for waste disposal.
Major Spills of Cell Materials
Clean up all spills immediately.
Wear protective clothing, safety glasses, dust mask, gloves.
Secure load if safe to do so. Collect recoverable product.
Use dry clean up procedures and avoid generating gas or volatile.
Ventilate the storage area.
Discharge the cell to Zero Voltage by a over 5 Ohm resistance, before place into waste container.
Collect remaining material in containers with covers for disposal.
Flush spill area with water.
Protective Actions for Spill
Section 7 - Handing and Storage