User Manual

• To position the microphone on the right or left side, rotate the microphone boom up and over.

Bend the boom so it is approximately 2 finger widths from the corner of your mouth.

NOTE Your headset senses when you change the microphone boom from one side to the other and

syncs the audio specific to each side.

• Gently flex the headband wider if the fit is uncomfortable on your ears.

Charge your headset using the micro USB cable or the charge stand (sold separately). The headset

LEDs flash when charging. It takes approximately 2 hours to fully charge your headset. The LEDs

turn off once charging is complete.

NOTE The micro USB cable and charge stand (sold separately) plug into a computer or wall charger's

USB port.

Micro USB cable Charge stand (sold separately)

Headset LEDs What they mean

Off Charging complete

Battery high

Battery medium

Battery low

Battery critical

Check your headset battery status:

• With headset inactive, slide and release the Power

switch away from the off position. Listen to

the voice alert or observe the headset LEDs.

Fit and charge

Wear on the right or left

Charge

Check headset battery

status