User Manual

11 Plantronics Electronic Hook Switch Guide 9.16 6317 To check compatibility with other desk phones, please visit plantronics.com/compatibility
EHS Cable Plantronics Audio Solutions
CS500/CS500 XD
SERIES
Wireless headsets
manage desk
phone calls
MDA200
Enables USB connectivity
to the desk phone to
manage both PC and
desk phone calls
VOYAGER LEGEND CS
Wireless Bluetooth
headset system
manages desk phone
and mobile calls
SAVI 700 SERIES
Wireless headset
system manages
PC, mobile and
desk phone calls
Electronic Hook Switch for NEC
NEC MODELS: DT 330/430, DT 730, DT 750, DT830/830G
SETUP CONFIGURATION
APN91™
PN: 89280-11
DESK PHONE MODELS
DT 330/430
DT 730
DT 750
DT830/830G
Savi 700 CS500/CS500 XD, Voyager Legend CS MDA200
optional
(#80287-01)
2
A 3
3
A
2
3
A
2
For phone set-up, please refer to your specific phone manufacturer’s instructions.
Cable A
Flap
Install the ringer detect device
on the phone over the speaker,
under the handset. This is then
plugged into the socket mounted
midway along the audio cable.
Supports only DT700/300 Series.
Please contact NEC for
more information.
Note: Disconnect the phone from the network cable prior to installing the EHS cable. Insert cable “A” per
diagram, and install the plastic flap included with the APN-91 cable, per the diagram prior to reconnecting the
network connection. Please wait 20-30 seconds after all connections are made before pressing the headset button
to make a call. Please contact NEC for more information.
*The NEC DT Series phones come in 2 versions, the std SIP (used
with NEC product SIP@NET and 3C) and the i-SIP/N-SIP versions
which are used with the SV8100, SV8300 and SV8500. The
APN-91 only works with the i-SIP/N-SIP versions of the DT700
terminals.
EHS Setup
Use the EHS setup below to automatically answer a desk phone call by pressing a button on your Savi 700 Series or CS500 Series headset or MDA200 or Voyager Legend CS.
NEC
Previous | Next Exit