User's Guide
Table Of Contents
- Contents
- Before You Begin
- Getting Started with Poly Trio
- Logging Into and Locking the System
- Audio Calls
- Placing Audio Calls
- Redial a Number
- Answering Audio Calls
- Decline an Incoming Call
- End an Audio Call
- Holding and Resuming Calls
- Transferring Calls
- Forwarding Incoming Calls to a Contact
- Rejecting Calls with Do Not Disturb
- Managing Multiple Calls
- Mute the Microphones
- Unmute the Microphone
- Conference Calls
- Video Calls on Poly Trio Systems
- Tips for Video Calls
- Video Call Settings
- Place a Video Call
- Stop Sending Video
- Start Video During an Audio Call
- Adjust the Camera Position During a Call
- Adjust Video Quality
- Adjust Camera Tracking Settings
- Switch Between Video and Content during Video Calls
- Handling a Mixture of Audio and Video Calls
- Camera Presets on Poly Trio Systems
- Recording Audio Calls
- Sharing Content on Poly Trio Systems
- Sharing Content with RealPresence Desktop or Mobile
- Sharing Content with the Polycom® Content Application
- Sharing Content with People+Content IP
- Sharing Content from an Apple Device
- Sharing Content from a Windows or Android Device
- Share Content with an HDMI or VGA Connection
- Share Content Automatically When Idle
- Share Content using the Polycom Content Application
- Using the Calendar
- Call Lists and Directories
- Voicemail and Pages
- Connecting Bluetooth and USB Devices
- Poly Trio Settings
- Maintaining Poly Trio
- Accessibility Features
- Troubleshooting
Camera presets are stored camera positions that you can create before or during a call. Presets enable
you to quickly point a camera at pre-defined locations in a room and persist until you change them. The
system uses preset 0 as the default camera position for all preset camera positions. This default camera
position is zoomed out, panned straight ahead with horizontal tilt.
If your system camera supports pan, tilt, and zoom movement, you can create up to 10 preset camera
positions for the near-end camera. Each preset stores the following information:
• Camera number
• Camera zoom level
• Camera direction
• Snapshot of the camera view
Store Camera Presets
You can store camera presets during a call or when the Poly Trio system is idle with a connected Poly
camera.
Procedure
1. Do one of the following:
• During a call, select Camera .
• Select Menu and select Camera.
• On the Home screen, select Camera.
2. Adjust the camera to your desired position and zoom level.
3. Select Presets.
The available and stored preset positions display.
4. Press and hold a preset position numbered 0 to 9.
The new position displays immediately.
Rename Stored Camera Presets
By default, presets are named in the order they are set, starting with "Preset 1". You can rename stored
presets with a name that identifies the camera position or zoom level.
Procedure
1. Go to Settings > Basic > Video.
2. Select Camera Settings.
3. Select Presets.
The available and stored preset positions display.
4. Select Edit .
5. Select a preset and edit the name of the preset.
Video Calls on Poly Trio Systems
45