User's Guide

Wake the System
After a period of no activity, the system enters sleep mode (if configured by your administrator). You can
wake it using a touch monitor, Poly Touch 8, or remote control.
Procedure
» Do one of the following:
▪ If you’re using a touch monitor, tap the screen.
▪ If you’re using the Poly Touch 8, tap the screen.
▪ Press any button on the remote control.
Accessibility Features
Polycom products include a number of features to accommodate hearing-, vision-, mobility-, or
cognitively-impaired users.
Features for Hearing-Impaired and Deaf Users
Certain features enable users with hearing impairments to use the system.
If needed, contact your administrator to enable the following features.
Features for Hearing-Impaired Users
Accessibility Feature Description
Visual notifications Status and icon indicators let you know when you have incoming,
outgoing, active, or held calls. Indicators also alert you of the device’s
status and when features are enabled.
Status indicator lights The system and its microphones use LEDs to indicate some statuses,
including if your microphones are muted.
Adjustable call volume While in a call, you can raise or lower the volume of the device.
Features for Vision-Impaired and Blind Users
Certain features enable users with visual impairments to use the system.
If needed, contact your administrator to enable the following features.
Features for Vision-Impaired and Blind Users
Accessibility Feature Description
Audio-only calls You can dial audio-only calls from the Place a Call screen on the local
interface or system web interface.
Getting Started
13