Users Manual

SME VOIP SYSTEM GUIDE 1.1 28 | P a g e
Proprietary and Confidential
PARAMETER DESCRIPTION
IDX Index of handsets
IPEI
Handset IPEI. IPEI is unique DECT identification number.
HANDSET STATE The state of the given handset:
Present@RPNxx: The handset is DECT located at the base with RPNxx
Detached: The handset is detached from the system (e.g. powered off)
Located: The handset is configured to locate on a specific base, but is has not been possible to
do so (e.g. if the base is powered off)
Removed:
The handset has been out of sight for a specified amount of time (~one hour).
HANDSET TYPE
FW INFO
Name of the handset type
Firmware version of handset
FWU PROGRESS Possible FWU progress states:
Off: Means sw version is specified to 0 = fwu is off
Initializing: Means FWU is starting and progress is 0%.
X%: FWU ongoing
Verifying X%: FWU writing is done and now verifying before swap
” Waiting for charger” (HS) / ”Conn. term. wait” (Repeater): All FWU is complete and is now
waiting for handset/repeater restart.
Complete HS/repeater: FWU complete
Error: Not able to fwu e.g. file not found, file not valid etc.
VOIP IDX Index of the configured SIP extensions. Select/deselect to start SIP registration or delete
ext
ension.
EXTENSION Given extension is displayed
DISPLAY NAME Given display name is displayed. If no name given this field will be empty
SERVER
Server IP or URL
SERVER ALIAS Given server alias is displayed. If no alias given this field will be empty.
STATE SIP registration state – if empty the handset is not SIP registered.
5.3.1.2 Handset and extension list top/sub-menus
The handset extension list menu is used to control paring or deletion of handset to the system (DECT registration/de-
registrations) and to control SIP registration/de-registrations to the system.
Above and below the list are found commands for making operations on handsets/and extensions. The top menu is
general operations, and the sub menu is always operating on selected handsets/extensions.
Screenshot
In the below table, each command is described.
ACTIONS DESCRIPTION
ADD EXTENSION Access to the “Add extension” sub menu
STOP REGISTRATION Manually stop DECT registration mode of the system. This prevents any
handset from registering to the system
DELETE HANDSET(S)
Deregister selected handset(s), but do not delete the extension(s).
REGISTER HANDSET(S) Enable registration mode for the system making it possible to register at a
specific extension (selected by checkbox)