Users Manual

SME VOIP SYSTEM GUIDE 1.1 33 | P a g e
Proprietary and Confidential
PARAMETER DEFAULT VALUE DESCRIPTION
SERVER ALIAS Empty Parameter for server alias
NAT
ADAPTION
Disabled To ensure all SIP messages goes directly to the NAT gateway
in the SIP aware router.
If the system receives a SIP response to a REGISTER request
with a “Via” header that includes the “received” parameter
(ex: “Via: SIP/2.0/UDP 10.1.1.1:4540;received=68.44.20.1”),
the base will adapt its contact information to the IP address
from the “received” parameter. Thus, the base will issue
another REGISTER request with the updated contact
information.
If NAT Adaption is disabled, the “received” parameter is
ignored.
REGISTRAR Empty SIP Server proxy DNS or IP address
Permitted value(s): AAA.BBB.CCC.DDD:<Port-Number> or
<URL>:<Port-Number>
Note: Specifying the Port Number is optional.
OUTBOUND
PROXY
Empty This is a Session Border Controller DNS or IP address (OR SIP
server outbound proxy address)
Set the Outbound proxy to the address and port of private
NAT gateway so that SIP messages sent via the NAT gateway.
Permitted value(s): AAA.BBB.CCC.DDD or <URL> or
<URL>:<Port-Number>
Examples: “192.168.0.1”, “192.168.0.1:5062”,
“nat.company.com” and “sip:[e-mail]:5065”.
If empty call is made via Register.
CONFERENCE
SERVER
Empty Broadsoft conference feature.
Set the IP address of the conference server.
In case an IP is specified pressing handset, conference will
establish a connection to the conference server.
If the field is empty, the original 3-party local conference on
8630 is used.
CALL LOG
SERVER
Empty Broadsoft call log feature.
Set the IP address of the XSI call log server.
In case an IP is specified pressing handset will use the call log
server.
If the field is empty, the local call log is used
MUSIC ON
HOLD SERVER
Empty Add the address of a server for ensuring music is on when
call is on hold
RE-
REGISTRATION
TIME
600 The “expires” value in SIP REGISTER requests. This value
indicates how long the current SIP registration is valid, and
hence is specifies the maximum time between SIP
registrations for the given SIP account.
Permitted value(s): A value below 60 sec is not
recommended, Maximum value 65636
SIP SESSION
TIMERS:
Disabled RFC 4028. A “keep-alive” mechanism for calls. The session
timer value specifies the maximum time between “keep-
alive” or more correctly session refresh signals. If no session
refresh is received when the timer expires the call will be
terminated.
Default value is 1800 s according to the RFC. Min: 90 s. Max:
65636.
If disabled session timers will not be used.