Users Manual

SME VOIP SYSTEM GUIDE 1.1 45 | P a g e
Proprietary and Confidential
Syslog/SIP Log:
PARAMETER DEFAULT VALUE DESCRIPTION
UPLOAD OF SIP
LOG
Disabled Enable this option to save low level SIP debug messages to the server. The
SIP logs are saved in the file format:
<MAC_Address><Time_Stamp>SIP.log
SYSLOG LEVEL Normal
Operation
Off: No data is saved on syslog server
Normal Operation: Normal operation events are logged, incoming call,
outgoing calls, handset registration, DECT location, and call lost due to
busy, critical system errors, general system information.
System Analyze: Handset roaming, handset firmware updates status. The
system analyze level also contains the messages from normal operation.
Debug: Used by RTX for debug. Should not be enabled during normal
operation.
TLS SECURITY
Disabled
If enabled, i
t uses encrypted TCP, else
-
UDP
SYSLOG SERVER
IP ADDRESS
Empty Permitted value(s): AAA.BBB.CCC.DDD or <URL>
SYSLOG SERVER
PORT
514 Port number of syslog server.
There are three ways of configuring the system.
1. Manual configuration by use of the Web server in the Base station(s)
2. By use of configuration files that are uploaded from a disk via the “Configuration” page on the Web server.
3. By use of configuration files which the Base station(s) download(s) from a configuration server.
Location Gateway
PARAMETER DEFAULT VALUE DESCRIPTION
LOCATION
GATEWAYS
Disabled Enable to allow Location Gateways onto the system.
When enabled “Location Gateway” menu will be shown on main menu on
the left.
CONFIGURATION
SERVER
Empty Permitted value(s): AAA.BBB.CCC.DDD or <URL>
AUTO RESYNC
POLLING
Disabled The poll enables the configuration server to start the provisioning process
for the Location Gateway devices that it chooses. If “Enabled”, it enables
an automatic configuration synchronization poll for the Location
Gateway(s)
AUTO RESYNC
TIME
The time of the day that the automatic synchronization will occur
(HH:MM).
AUTO RESYNC
MAX DELAY
(MIN)
To distribute load such that all bases do not sync at the exact same time,
the Auto Resync Max Delay can be set to delay the poll trigger with a given
number of minutes. The delay will be a random number between 0
minutes and the value given in this parameter.