Users Manual

SME VOIP SYSTEM GUIDE 1.1 49 | P a g e
Proprietary and Confidential
5.9 Country/Time Settings
In this section, we describe the different parameters available in the Time Server menu.
The country setting controls the in-band tones used by the system.
The Time server supplies the time used for data synchronisation in a multi-cell configuration. As such it is mandatory
for a multi-cell configuration. The system will not work without a time server configured.
As well the time server is used in the debug logs and for SIP traces information pages and used to determine when to
check for new configuration and firmware files.
NOTE: It is not necessary to set the time server for standalone Base stations (optional).
Press the “Time PC” button to grab the current PC time and use in the time server fields.
NOTE: When time server parameters are modified/changed synchronisation between Base stations can take up to 15
minutes before all Base stations are synchronised, depending on the number of Base stations in the system. Changing
time settings will require a reboot of system.