Users Manual

SME VOIP SYSTEM GUIDE 1.1 55 | P a g e
Proprietary and Confidential
LDAP
Select “LDAP Server” from the “Location” parameter and wait a few seconds for the new configuration menu. Fill in
the empty fields with the needed data and press Save.
PARAMETER DEFAULT VALUES DESCRIPTION
CENTRAL DIRECTORY
LOCATION
LDAP Server Drop down menu to select between local central directory and LDAP
based central directory. LDAP Server is displayed when LDAP server
is selected.
SERVER Empty IP address of the LDAP server.
Valid Inputs: AAA.BBB.CCC.DDD or <URL>
TLS SECURITY Disable If enabled, it uses encrypted TCP, else – UDP
Note: In most cases LDAP over TLS is running on port 636
PORT Empty The server port number that is open for LDAP connections
Note:
In most cases LDAP over TLS is running on port 636
SBASE Empty Search Base. The criteria depend on the configuration of the LDAP
server. Example of the setting is CN=Users, DC=umber, DC=loc
LDAP FILTER Empty LDAP Filter is used to as a search filter, e.g. setting LDAP filter to
(|(givenName=%*)(sn=%*)) the IP-DECT will use this filter when
requesting entries from the LDAP server. % will be replaced with the
entered prefix e.g. searching on J will give the filter
(|(givenName=J*)(sn=J*)) resulting in a search for given name
starting with a J or surname starting with J.
BIND Empty Bind is the username that will be used when the IP-DECT phone
connects to the server
PASSWORD Empty Password is the password for the LDAP Server
VIRTUAL LIST Disabled By enable, virtual list searching is possible
NAME Empty The name can be used to specify if sn+givenName or cn (common
name) is return in the LDAP search results
WORK NUMBER Empty Work number is used to specify that LDAP attribute that will be
mapped to the handset work number
HOME NUMBER Empty Home number is used to specify that LDAP attribute that will be
mapped to the handset home number
MOBILE NUMBER Empty Mobile number is used to specify that LDAP attribute that will be
mapped to the handset mobile number