Manualshelf

Users Manual

ManualsBrandsPoly ManualsTelecom EquipmentDECT Base Station with DECT function
51525354555657585960
SME VOIP SYSTEM GUIDE 1.1 60 | P a g e
Proprietary and Confidential
Base station Group
The Base station group list various parameter settings for Base stations including chain level information.
Screenshot:
PARAMETERS DESCRIPTION
ID Base unit identity in the chained network.
Permitted Output: Positive Integers
RPN The Radio Fixed Part Number is an 8-bit DECT cell identity allocated by the installer. The
allocated RPN within the SME must be geographically unique.
Permitted Output: 0 to 255 (DEC) OR 0x00 to 0xFF (HEX)
VERSION Base station’s current firmware version.
Permitted Output:
positive Integers with dot (e.g.
480.1
)
MAC ADDRESS Contains the hardware Ethernet MAC address of the Base station. It varies from Base
station to Base station.
IP ADDRESS Base station’s current IP address
IP STATUS Current Base station behavior in the SME network.
Possible Outputs
Connected: The relevant Base station(s) is online and connected to the network
Connection Loss: Base station unexpectedly lost connection to network
This Unit: Current Base station whose http Web Interface is currently being accessed
DECT SYNC
SOURCE
With setting “Auto configure DECT sync source tree” set to “Enable”, this tree will
automatically be generated. If manually configured, the administrator should choose the
relevant “multi cell chain” level he wants and organize the Base units. Maximum number
of “multi-cell chain” levels is 24.
Format of the selection: “AAAAAxx: RPNyy (-zz dBm)”
AAAAA: indication of sync. source for the base. Can be “Primary” or “Level xx”
xx: Sync. source base sync. level
yy: Sync. source base RPN
zz: RSSI level of sync. source base seen from the actual base
“(Any) RPN”: When a base is not synchronized to another base. State after reboot of
chain.
DECT PROPERTY Base station characteristics in connection to the current multi cell network.
Possible Output(s)
Primary: Main Base station to which all other nodes in the chain synchronizes to.
Locked: The Base unit is currently synchronized and locked to the master Base unit.