Users Manual Part 2

SME VOIP SYSTEM GUIDE 1.1 123 | P a g e
Proprietary and Confidential
STEP 1 Chose configuration file
STEP 2 Press Load to load the file.
The base station will now load the file and the settings will be as in the configuration file.
14.4 How to create a configuration file.
To create a configuration file, you must use the web server interface and do a full setup, and set all settings as needed.
When the base station is setup and ready, go to the configuration page.
Screenshot
Press Export and save the cfg file.
NOTE: You must save the file as “Mac-address name.cfg” (e.g 00087b13ae79.cfg)
To load the configuration into another base station, rename the fil with the base stations MAC address and load it, as
described in 11.3.
14.5 Configuration via Configuration Server.
It is also possible to use configuration files that are downloaded from a configuration server. To be able to use
configuration files instead of manual configuration, the base stations must be set up to use configuration files. This
can be done by use of DHCP option 66, or it can be configured via the Web server.
DHCP option 66 (TFTP Boot up server):
1. Upload of configuration file with setting the below parameter to 0 for option 66
NETWORK_DHCP_CLIENT_BOOT_SERVER /* Select scheme for detecting the DHCP server 0: Option 66 1: Custom
3: Custom + Option.66 */ Default value defined: 2
2. Configuration by web interface as described in the below configuration for web server section
In the configuration file, you must change CONFIGURATION_DOWNLOAD_CTRL%:0x00 to
CONFIGURATION_DOWNLOAD_CTRL%:0x01