User Manual

User Guide for the SoundStation IP 6000 Phone
2 - 16
— (Optional.) Set the Ring Type.
For information on setting the ring type, see Updating the Ring Tone
on page 2-9.
— (Optional.) Assign a Divert Contact.
The Divert Contact identifies the third party to which you want this
contact’s calls sent.
— (Optional.) Change the Auto Reject and Auto Divert settings.
If you set the Auto Reject field to enabled, each time the contact calls,
the call will be directed to your voice mail system (if a voice mail
system is set up). If you set the Auto Divert field to enabled, each time
the contact calls, the call will be directed to a third party you specify
in the Divert Contact field.
Use the scroll keys or the Change soft key to switch between the
Enabled and Disabled settings for the Auto Reject and Auto Divert
fields.
— (Optional.) Change the Watch Buddy and Block Buddy settings.
If you set the Watch Buddy field to enabled, you can monitor the
contact’s status. If you set the Block Buddy field to enabled, the contact
cannot monitor your status. For more information on monitoring
status, see Using Buddy Lists on page 4-2.
Use the scroll keys or the Change soft key to switch between the
Enabled and Disabled settings for the Watch Buddy and Block Buddy
fields.
4. Press the Save soft key.
5. Press to return to the idle screen.
Note
If you do not have a voice mail system set up, enabling the Auto Reject field will
have no effect. Each time the contact calls, your phone will ring (unless you choose
to divert the contact’s calls, or enable call forwarding or Do Not Disturb on your
phone).