KIRK System 500 2G4 Technical Guide 14090000 Version 2
KIRK System 500 2G4 - Technical Guide - 14090000 Version 2 Copyright © Polycom, Inc. All Rights Reserved Catalog No. 14090000 Version 2 Proprietary and Confidential The information contained herein is the sole intellectual property of Polycom, Inc. No distribution, reproduction or unauthorized use of these materials is permitted without the expressed written consent of Polycom, Inc.
Contents Contents How to Register a Master Handset Registering Additional Handsets via Master Handset . . . . . . . . . . . . 1–2 How to Delete a Registered Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 How to Register a Repeater How to Register a Repeater to the System . . . . . . . . . . . . . . . . . . . . . . 2–1 How to Establish Repeater Jumps (Repeaters in a Chain) . . . . . . . . . 2–2 Regulatory Information Important Safety Instructions and Product Information . . . . . . . .
1 How to Register a Master Handset When turning on the KIRK System 500 2G4, it will automatically go into registration mode for a period of 15 min. In this period you can register the MASTER handset. (it’s only possible to login 1 MASTER on each system. The first handset is automatically the MASTER handset). It is now possible to register the first handset (it will automatically be configured to channel 00). • Press the menu key.
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 • Press the ”menu” key. • Press the > key once. • The menu must now show ”EXT. Service” • Press the ✓ key. The menu will now show ”Clip Stack ” • Press the < key twice ”Read/Write userdata” appears in the display. • Then press the ✓key. The Serial Number of the MASTER handset will now show in the display. Press the ✓key. Right after this has been done, the handset will ask for an extension number.
How to Register a Master Handset Right after this has been done, the handset will ask for an extension number. Simply enter the extension number. Then press the ✓key (can be the ”old” extension number used on the corded phone. Or alternatively any number available in the PABX). The MASTER handset has now ” allowed ” the system to register the new handset to the system. You can now register the handset following the procedure used when registering the MASTER handset.
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 1–4
2 How to Register a Repeater If you want to expand the coverage area of the system, this is done by adding repeaters to the system. As indicated by the name, it adds a larger area to the already existing coverage area. Note The repeater does not add capacity, ie. more channels, but only a larger coverage area.
Kirk System 500 2G4 - Technical Guide - 14090000 Version 2 How to Establish Repeater Jumps (Repeaters in a Chain) The repeater furthest from the base station cannot ”see” the system – it is therefore necessary to establish a connection to the basestation through the repeater which is closest. When registering the repeater (Number 2 in the chain from the base station) it is important to enter the number of the repeater through which you are ”looking” as if it was a base station (i.e.
3 Regulatory Information Important Safety Instructions and Product Information Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, electrical shock and injury to persons, and damage to property. 1 Read and understand all instructions 2 Follow all warnings and instructions including those marked on the product 3 Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners.
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 a AQ If liquid has been spilled into the product b BQ If the product has been exposed to rain or water c CQ If the product does not operate normally when following the operating instructions in the manual. Adjust only those controls that are covered by the operation instructions.
Regulatory Information NOTICES NOTICE: Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier.
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 d Consult the dealer or an experienced radio/TV technician for help. Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless telephone requires electricity for operation. You should have a telephone which does not require electricity available for use during power outages.
Regulatory Information THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSOR IMPLIED. ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY.
