VIEW Certified Configuration Guide Ruckus Wireless Ruckus ZoneFlex 7962 Access Point April 2009 Edition 1725-36195-001 Version A
Configuration Guide Trademark Information Notice Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property of their respective owners. Polycom, Inc. has prepared this document for use by Polycom personnel and customers.
Ruckus ZoneFlex 7962 Access Point Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and WLAN infrastructure products. The products listed below have been thoroughly tested in Polycom’s lab and have passed VIEW Certification. This document details how to configure the Ruckus ZoneFlex 7962 Access Point (AP) with SpectraLink Wireless Telephones.
Configuration Guide Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper. This document covers the security, coverage, capacity and QoS considerations necessary for ensuring excellent voice quality with enterprise Wi-Fi networks. For more detailed information on wireless LAN layout, network infrastructure, QoS, security and subnets, please see the Best Practices Guide for Deploying SpectraLink 8020/8030 Wireless Telephones.
Ruckus ZoneFlex 7962 Access Point Network Topology The following topology was tested during VIEW Certification. It is important to note that these do not necessarily represent all “certified” configurations. PN: 1725-36195-001_A.
Configuration Guide AP Configuration Setup The Ruckus AP is easy to configure. Enter the desired SSID name and encryption via Web Interface or SSH. SpectraLink voice is automatically recognized and prioritized. Log in to AP via web interface or SSH Default IP = 192.168.0.1, Username = super, Password = sp-admin Set up SSID name and encryption 1. In the navigation pane under Configuration, click Radio 2.4G. 2. Click the Wireless 1 tab. 3.
Ruckus ZoneFlex 7962 Access Point PN: 1725-36195-001_A.
Configuration Guide Enabling Rate Limiting The ZoneFlex AP 7962 is VIEW Certified for 802.11b operation only, without a WLAN controller. In an environment with 802.11b data clients, it is required to enable rate limiting to ensure optimal voice performance. 1. In the navigation pane under Configuration, click Radio 2.4G. 2. Click the Wireless 1 tab. 3. At Rate Limiting click Edit Settings. 4. For Per Station Traffic Rate, select 500 kbps link per station from the Downlink and Uplink drop-down lists.
