Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–76 Polycom, Inc.
configdisplay
Sets or gets the video format, aspect ratio and resolution for Monitor 1 or
Monitor 2.
Syntax
configdisplay [<monitor1|monitor2>] get
configdisplay <monitor1|monitor2>
<component|vga|dvi|composite|s_video> <4:3|16:9>
configdisplay <monitor1|monitor2>
<component|vga|dvi|composite|s_video> <4:3|16:9> [<720p|1080i|1080p>]
[<50hz720p|60hz720p|50hz1080i|60hz1080i|50hz1080p|60hz1080p>]
configdisplay monitor2 off
Parameter Description
get Returns the current setting.
monitor1 Specifies Monitor 1.
monitor2 Specifies Monitor 2.
s_video Sets the specified display to S-Video format.
composite Sets the specified display to Composite format.
vga Sets the specified display to VGA format.
dvi Sets the specified display to DVI format.
component Sets the specified display to Component format.
4:3 Sets the display aspect ratio to 4:3 (standard).
16:9 Sets the display aspect ratio to 16:9 (wide screen).
720p Sets the resolution to 1280x720p, 50-60 Hz (refresh
rate determined by whether unit is PAL or NTSC,
respectively). For monitors with Component format and
16:9 aspect ratio only.
1080i Sets the resolution to 1920x1080i, 50 -60 Hz (refresh
rate determined by whether unit is PAL or NTSC,
respectively). For monitors with Component format and
16:9 aspect ratio only.
1080p Sets the resolution to 1920x1080p, 50 -60 Hz (refresh
rate determined by whether unit is PAL or NTSC,
respectively). For monitors with Component format and
16:9 aspect ratio only.
50hz720p Sets the resolution to 1280x720p, 50 Hz (PAL
systems-only). For monitors with Component format
and 16:9 aspect ratio only.