Specifications

System Commands
Polycom, Inc. 4–97
diffservaudio, diffservfecc, diffservvideo
Sets or gets the DiffServ option and specifies a priority level for audio, far-end
camera control (FECC) and other call control channels, and video,
respectively. The priority level value for each can be between 0 and 63.
Syntax
diffservaudio get
diffservaudio set {0..63}
diffservfecc get
diffservfecc set {0..63}
diffservvideo get
diffservvideo set {0..63}
Feedback Examples
• diffservaudio set 2
returns
diffservaudio 2
• diffservaudio get
returns
diffservaudio 2
Comments
The diffservfecc command is equivalent to the Control setting in the user
interface.
If the typeofservice command on page 4-311 is set to
ip-precedence rather
than to diffserv
, these commands are not applicable.
Parameter Description
get Returns the current setting.
set Sets the command. A priority level in the range
{0..63}
is required.
{0..63} Specifies the priority level.