Specifications

System Commands
Polycom, Inc. 4–189
isdncountrycode
Sets or gets the ISDN country code associated with the country where the
system is used. This command is only applicable if you have an ISDN network
interface connected to your system.
Syntax
isdncountrycode get
isdncountrycode set [“country code”]
Feedback Examples
• isdncountrycode set 1
returns
isdncountrycode 1
• isdncountrycode get
returns
isdncountrycode 1
Comments
The system is generally able to automatically determine the country code
based on the country you selected during initial system setup.
Parameter Description
get Returns the country code information.
set Sets the ISDN country code when followed by the
“country code” parameter. To erase the current
setting, omit “country code” .
“country code” The ISDN country code.