Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–280 Polycom, Inc.
screen
Returns the name of the current user interface screen on the system, registers
or unregisters for screen changes, or goes to a specific user interface screen.
Syntax
screen
screen register get
screen [register|unregister]
screen “screen_name”
Feedback Examples
• screen
returns
screen: adminsettings
if the Admin Settings screen is currently displayed in the user interface
•
screen register
returns
screen registered
• screen monitors
returns
screen: monitors
and displays the Monitors screen in the user interface
Parameter Description
screen Returns the name of the current user interface screen if
not followed by other parameters.
register Registers for user interface screen changes. In register
mode, the name of every screen accessed is listed.
get Returns the registration state for screen change events
when followed by the get parameter.
unregister Unregisters from user interface screen changes.
“screen_name” Changes the user interface to display the specified
screen. The supported screens depend on the system
configuration. To determine the name to use for a
specific screen, navigate to that screen in the user
interface and send the
screen command.