Operation Manual

User’s Guide for Polycom HDX Room Systems
10 Polycom, Inc.
To select a near-site or far-site camera, or other video source:
1 If you are in a call, press Near or Far on the remote
control to select either near-site or far-site control.
2 Press Camera on the remote control. Then select the camera or other
video source you want to use.
To adjust a Polycom EagleEye HD, Polycom EagleEye II, Polycom EagleEye 1080,
Polycom EagleEye III, or Polycom EagleEye Director using the remote control:
1 Select either a near-site or far-site video source to control. During a
multipoint call being hosted by a system in the call, you can only adjust a
camera at the far site that is currently speaking.
2 Press the arrow buttons on the remote control to move the camera up,
down, left, or right.
3 Press Zoom on the remote control to zoom out or in.
To adjust a Polycom EagleEye View camera:
1 Manually swivel the camera right, left, up, or down to frame the view.
This onscreen icon indicates that you have selected
a near-site camera or video source.
This onscreen icon indicates that you have selected
a far-site camera or video source.
If you are using an EagleEye Director and camera tracking is on, you must turn
camera tracking off before adjusting the camera.