Operation Manual

User’s Guide for Polycom HDX Room Systems
Polycom, Inc. 19
When you are showing content, the content icon appears on your main
monitor. Whether you also see the content on your monitor or projector
depends on how your system was configured.
Showing Content with People+Content™ IP
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
To install People+Content IP on a computer:
1 On a computer with a Microsoft® Windows XP, Windows Vista, or
Windows 7 operating system, open a web browser and go to
www.polycom.com/ppcip.
2 Download and install the People+Content IP software.
To start showing content:
1 On the computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the Polycom HDX system and the
meeting password, if one is set.
3 On the computer, click Connect.
4 Open the content you want to show, and click in People+Content IP.
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2 Click in People+Content IP or press Camera and deselect the
computer input.
3 Click Disconnect.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
• The People+Content IP application must be installed on a computer.
If you are using multiple screens on your computer, move the People+Content IP
icon to the screen you want to share.