Operation Manual

User’s Guide for Polycom HDX Room Systems
Polycom, Inc. 35
To enter a meeting password:
• If a prompt appears on the screen, use the remote control or onscreen
keyboard to enter the password.
• If you hear an audio prompt, use the remote control to generate DTMF
tones.
To configure a meeting password:
1 Select System from the Home screen.
2 Select User Settings from the System screen.
3 Enter the password in the Meeting Password field in one of these ways:
— Press the remote control number buttons, using the text-entry method
commonly used with cell phones.
— Press Keyboard to use the onscreen keyboard to enter
characters.
4 Press Home to save your change and return to the Home screen.
Multipoint Viewing Modes
What you see during a multipoint call can vary depending on how the
Polycom HDX system is configured, the number of sites participating, the
number of monitors you are using, and whether content is shared. The
multipoint viewing mode configured on the host system is the one used in the
call. To find out more about these modes, please talk to the administrator of
your Polycom HDX system. The following table describes the different
multipoint viewing modes when an HDX system is hosting the multipoint call.
Setting Description
Video images from multiple sites can be automatically combined on one monitor in
a display known as continuous presence.
Auto The view switches between continuous presence and
full screen, depending on the interaction between the
sites.
If multiple sites are talking at the same time,
continuous presence is used. If one site speaks
uninterrupted for at least 15 seconds, that site appears
in full screen on the monitor.